THE DEVELOPMENT OF FLEXIBLE DENTURE MATERIALS AND CONCEPT: A NARRATIVE REVIEW
Received 2020-05-08; Accepted 2020-12-07; Published 2021-03-05
DOI:
https://doi.org/10.22452/jummec.vol24no1.4Keywords:
Flexible Denture Material, Physical Properties, Indications, ContraindicationsAbstract
Introduction: Flexible denture is an alternative treatment modality for removable partial denture (RPD) that aid the retention by ensuring seal around the entire border of the denture. It is also referred as hypoallergenic denture especially for those who are allergic towards conventional acrylic denture which is the poly-methylmethacrylate monomer (PMMA) and metal (cobalt chromium). The flexible material exhibits lower flexural modulus than conventional type of baseplate material denture that makes it nearly unbreakable. Nowadays, there are a handful of different flexible materials in the dental market for the general dental practitioners to choose but somehow the studies on the properties of these different types of flexible materials are sparse.
Objectives: The present study is to study the development of the flexible materials, the different type of flexible materials and their physical properties.
Methods: From the limited article journals available, the authors have summarized the history, development and constituents of different type of flexible materials used in fabricating denture. Besides that, the authors also discussed about the indications, contraindications, advantages and disadvantages of the materials in denture constructions based on all the published researches available on this topic using published materials available in the dental library, University of Malaya and the databases (Science Direct, PubMed).
Conclusion: Each flexible material has its pros and cons. Therefore, careful selection of material and understanding of the flexible dentures’ indications and contraindications are utmost importance to make sure the best treatment outcome. Hence, patients’ best interest and quality of life can be upheld.
Downloads
Downloads
Published
Issue
Section
License
All authors agree that the article, if editorially accepted for publication, shall be licensed under the Creative Commons Attribution License 4.0 to allow others to freely access, copy and use research provided the author is correctly attributed, unless otherwise stated. All articles are available online without charge or other barriers to access. However, anyone wishing to reproduce large quantities of an article (250+) should inform the publisher. Any opinion expressed in the articles are those of the authors and do not reflect that of the University of Malaya, 50603 Kuala Lumpur, Malaysia.